-
Battery A27/ 12V
Additonal TX33 remote control battery
€1,08 (excl. VAT)Battery A27/ 12V
€1,08 (excl. VAT) -
Battery protection + Communication module for intercom systems and BKU controllers – LPDD2
Make the installation of your locking system easy without running unnecessary cables. The LPDD2 module allows you to use the already routed power cables from the intercom system to the lock without having to cut too much. Read the detailed description below.
€13,27 (excl. VAT) -
Battery protection module – LPDD1
Make the installation of your locking system easy without running unnecessary cables. The LPDD2 module allows you to use the already routed power cables from the intercom system to the lock without having to cut too much. Read the detailed description below.
€6,37 (excl. VAT)Battery protection module – LPDD1
€6,37 (excl. VAT) -
DIN rail power supply AC220V/ DC 5V
- comply with EN55022, CLASSA
- universal AC input
- Small volume,low weight,high efficiency
- Protections:short circuit/over load/over voltage
- cooling by free air convectio
- can be installed on DIN rail: TS-35/7.5or TS-35/15
- LED indicator for power on
- 100% full load burn-in test
€17,86 (excl. VAT)DIN rail power supply AC220V/ DC 5V
€17,86 (excl. VAT) -
DIN rail power supply AC220V/ DC 12V
- comply with EN55022, CLASSA
- universal AC input
- Small volume,low weight,high efficiency
- Protections:short circuit/over load/over voltage
- cooling by free air convectio
- can be installed on DIN rail: TS-35/7.5or TS-35/15
- LED indicator for power on
- 100% full load burn-in test
€17,86 (excl. VAT)DIN rail power supply AC220V/ DC 12V
€17,86 (excl. VAT) -
DIN rail power supply AC220V/ DC 24V
- comply with EN55022, CLASSA
- universal AC input
- Small volume,low weight,high efficiency
- Protections:short circuit/over load/over voltage
- cooling by free air convectio
- can be installed on DIN rail: TS-35/7.5or TS-35/15
- LED indicator for power on
- 100% full load burn-in test
€17,86 (excl. VAT)DIN rail power supply AC220V/ DC 24V
€17,86 (excl. VAT) -
Power supply 220VAC / 12VDC 2A
Impulse power supply module converting from 90V to 240V mains supply voltage into 12V direct voltage with a maximum load of up to 2A.
€7,96 (excl. VAT)Power supply 220VAC / 12VDC 2A
€7,96 (excl. VAT) -
Power supply 220VAC / 14VDC 2A for charging 12V batteries
Pulse power supply 13.6V, extremely suitable for charging 12V batteries (up to 7Ah) and for powering remote devices
€9,48 (excl. VAT)Power supply 220VAC / 14VDC 2A for charging 12V batteries
€9,48 (excl. VAT) -
Socket terminal
Universal socket with terminal, facilitating the connection of different modules. On one side of the socket there is an input for a standard power supply, and on the other is a terminal strip. Especially suitable in cases where the device is powered by a terminal or wires, and at the time of installation, a multimeter and a soldering iron are not available.
€1,03 (excl. VAT)Socket terminal
€1,03 (excl. VAT) -
Valcor GSM cable socket for battery charging
Cable socket for connecting battery to GSM communicators Valcor GSM5xx
From Product Options you can choose an option:
1. Standard – for connection with battery only
2. Combined – for connecting to a battery and output cables for powering devices with DC12V (Such as BKU controllers)€3,08 – €5,14 (excl. VAT)
Shop By Department
- Home
- Access Control
-
- No Touch
- Power supply
- Code Wallets
- GSM Communicators
-
- Remote Control
-
Our products
- View all
- VCB Single-Channel with up to 14 remote controls – hopping code
- VCH Two-Channel with up to 14 remote controls – hopping code
- VCL1 Three-Channel with up to 64 remote controls – hopping code
- VCL2 Three-Channel with up to 128 remote controls – hopping code
- Additonal Remote Controls – Valcor TX33
- Case for Valcor TX33
-
- Raspberry Pi
- Solar