-
MaticBox 3 – innovative case for Raspberry Pi 3 & Asus Tinker Board
Innovative MaticBox is a case for Raspberry Pi and Asus tinker board. It comes with a large set of components that make it applicable to a wide range of scenarios. It can be attached to any surface, including DIN rails. Multiple ventilation and cable slots as well as dedicated support for active cooling help keep the processor’s temperature down.
€8,38 (excl. VAT)MaticBox 3 – innovative case for Raspberry Pi 3 & Asus Tinker Board
€8,38 (excl. VAT) -
MaticBox 4 – innovative case for Raspberry Pi 4
Innovative MaticBox is a case for Raspberry Pi 4. It comes with a large set of components that make it applicable to a wide range of scenarios. It can be attached to any surface, including DIN rails. Multiple ventilation and cable slots as well as dedicated support for active cooling help keep the processor’s temperature down.
€8,38 (excl. VAT)MaticBox 4 – innovative case for Raspberry Pi 4
€8,38 (excl. VAT) -
Brushless Cooling Fan 5V 2507 – 15000rpm
It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. (as seen on the photos)
The price is per one fan.
Here you can find more information about MaticBox innovative case: MaticBox 4
Here you can read our article about fan efficiency and comparison: Which is the most efficient fan for Raspberry Pi 4?€3,85 (excl. VAT)Brushless Cooling Fan 5V 2507 – 15000rpm
€3,85 (excl. VAT) -
HATL02F Auto-Fan Control & I2C pins
Do you want to extend the life of your fan, reduce its noise and control it automatically?
With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C pins.
I2C pins along with a 3.3V pin are often used to connect displays or other modules that use an I2C pins
Place it on pins 1-10. (As shown in the photos) And this is all you have to do on the hardware.Compatible with MaticBox Low Profile Cover and Automation Profile cover
€3,00 (excl. VAT)HATL02F Auto-Fan Control & I2C pins
€3,00 (excl. VAT) -
HATL01F Fan Auto-Control for Raspberry Pi
Do you want to extend the life of your fan, reduce its noise and control it automatically?
With this automatic fan MaticControl module you will be able to do this.
Place it on pins 1-8. (As shown in the photos) And this is all you have to do on the hardware.Compatible with MaticBox Low Profile Cover and Automation Profile cover
€2,50 (excl. VAT)HATL01F Fan Auto-Control for Raspberry Pi
€2,50 (excl. VAT) -
HATL01FP Fan Auto-Control for Raspberry Pi with 5V pins
Do you want to extend the life of your fan, reduce its noise and control it automatically?
With this MaticControl fan module you can! As a bonus, the second connector provides access to the 5V pins.
Place it on pins 1-8. (As shown in the photos) And this is all you have to do on the hardware.Compatible with MaticBox Low Profile Cover and Automation Profile cover
€2,75 (excl. VAT)HATL01FP Fan Auto-Control for Raspberry Pi with 5V pins
€2,75 (excl. VAT) -
HATL02FP Auto-Fan Control & I2C, 5V, TXD, RXD pins
Do you want to extend the life of your fan, reduce its noise and control it automatically?
With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C /TxD /RxD pins and third connector provides access to the 5V pins. I2C pins along with a 3.3V pin are often used to connect displays or other modules that use an I2C pins Place it on pins 1-10. And this is all you have to do on the hardware.
Compatible with MaticBox Automation cover
Not compatible with the stacking feature of MaticBoxFor more detailed info check the description below.
€3,50 (excl. VAT)HATL02FP Auto-Fan Control & I2C, 5V, TXD, RXD pins
€3,50 (excl. VAT) -
DIN rail power supply AC220V/ DC 5V
- comply with EN55022, CLASSA
- universal AC input
- Small volume,low weight,high efficiency
- Protections:short circuit/over load/over voltage
- cooling by free air convectio
- can be installed on DIN rail: TS-35/7.5or TS-35/15
- LED indicator for power on
- 100% full load burn-in test
€17,86 (excl. VAT)DIN rail power supply AC220V/ DC 5V
€17,86 (excl. VAT) -
Brushless Cooling Fan 5V 2507 – 5000rpm
It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. (as seen on the photos)
The price is per one fan.
Here you can find more information about MaticBox innovative case: MaticBox 4
Here you can read our article about fan efficiency and comparison: Which is the most efficient fan for Raspberry Pi 4?€3,85 (excl. VAT)Brushless Cooling Fan 5V 2507 – 5000rpm
€3,85 (excl. VAT) -
Brushless Cooling Fan 5V 2510 – 7000rpm
It is compatible with the MaticBox fan adapter. It can be placed directly on the case body as well. (as seen on the photos)
The price is per one fan.
Here you can find more information about MaticBox innovative case: MaticBox 4
Here you can read our article about fan efficiency and comparison: Which is the most efficient fan for Raspberry Pi 4?€3,85 (excl. VAT)Brushless Cooling Fan 5V 2510 – 7000rpm
€3,85 (excl. VAT) -
Passive Cooling for Raspberry Pi (Heatsink)
Aluminium Heatsink Set for Raspberry Pi 4, 3 or 2 with pre-applied tape for easy installation
- 1 piece: 14 x 14 x 5 mm
€1,19 (excl. VAT)Passive Cooling for Raspberry Pi (Heatsink)
€1,19 (excl. VAT)
Shop By Department
- Home
- Access Control
-
- No Touch
- Power supply
- Code Wallets
- GSM Communicators
-
- Remote Control
-
Our products
- View all
- VCB Single-Channel with up to 14 remote controls – hopping code
- VCH Two-Channel with up to 14 remote controls – hopping code
- VCL1 Three-Channel with up to 64 remote controls – hopping code
- VCL2 Three-Channel with up to 128 remote controls – hopping code
- Additonal Remote Controls – Valcor TX33
- Case for Valcor TX33
-
- Raspberry Pi
- Solar